DIY KIT: AirTag not included. Soldering required. Prefer a pre-built version? Check it out here!
Apple AirTag 3 mm Wallet Card Modification DIY Conversion Kit
Apple AirTag 3 mm Wallet Card Modification DIY Conversion Kit
Turn Your AirTag into a 3mm Thick Card for Your Wallet.
Couldn't load pickup availability
Product Description:
This conversion kit made specifically for Apple's AirTag uses a special enclosure to achieve a thickness of less than half of that of the unmodified version. This allows it to more easily fit in a card compartment of any leather or minimalist wallet, being barely as thick as 3 credit cards.
Compatibility & Requirements:
- Card-Shaped Adapter recommended for a regular leather wallet.
-
Ridge Adapter recommended for “Ridge-style” minimalist wallets.
- Genuine or replica Ridge conversion kits replace one of the inner metal pieces (not outer decorative plates) of a genuine or replica Ridge wallet, allowing an AirTag to be much more concealed.
- Genuine Ridge Conversion Kit is designed for original "The Ridge" wallets manufactured after mid-2016.
- Replica Ridge Conversion Kit is designed for 3rd party generic replicas of the Ridge wallet, but is only guaranteed to be compatible with our own minimalist wallet.
- Thanks to customer feedback, we have learnt that our replica Ridge wallet module is likely to be compatible‡ with the following 3rd party wallets: ROSSM, Mountain Voyage, and Hayvenhurst.
Please note that the following tools, as well as soldering expertise are required to perform this mod, if you do not have these available, a pre-made version is also available in my store:
- Soldering iron.
- Heat gun or hair dryer.
- Hot glue gun.
- Small flat head screwdriver.
- Box cutter.
- Flush cutter pliers.
- Safety goggles.
Find the detailed guides and instructions videos here.
What's in the Box?
- 1x Slim AirTag shell.
- 2x Toshiba CR2025 batteries.
- 1x Ridge adapter (Optional).
- 1x Card-shaped adapter (Optional).
- 1x Battery removal pry tool.
- 5x Copper wires.
- 1x Top surface sticker.
- AirTag NOT included. Find the pre-assembled version with an AirTag included here.
Product Specifications†:
- Length: 62 mm or 2.4 in.
- Width: 35 mm or 1.4 in.
- Thickness: 3.44 mm or 0.13 in.
- Weight ~ 10 g or 0.35 oz.
- User-replaceable 6-month battery (free extra battery included).
- Construction material: 3D printed PETG.
For any other information, questions, support, or wholesale inquiries please feel free to contact us directly using the icon at the bottom right corner of your screen.
‡ Due to the various Ridge wallet replicas found online, compatibility with any 3rd party wallets is not guaranteed. However, if you place an order and it ends up not being compatible with your specific model, we are happy to accept a return without a restocking fee.
†All measurements mentioned are accurate to ±0.1 mm.
It was my first electronics project. I followed the detailed video and instructions and took my time. It worked!
Great customer service. Be aware this is a DIY kit. :)
Why apple doesn't make this idk, but I thank you for this! I HIGHLY RECOMMEND TO JUST ORDER THE PREMADE ONE. Unless you know how to solder and are ready for that task, the premade one was so simple
Why apple doesn't make this idk, but I thank you for this! I HIGHLY RECOMMEND TO JUST ORDER THE PREMADE ONE. Unless you know how to solder and are ready for that task, the premade one was so simple
The DIY kit turned out to be a little too hard for me, mostly due to the need to solder some stiff wires to pads that were left when connectors were removed. Maybe someone else would do better, but I just went back and bought a unit the seller adapted himself. Much easier! :-)